Skip to main content

VURA FixLoc


Pack Size:
40 Kg

Color:
Grey

ADHESIVE FOR CONCRETE BLOCKS, AAC BLOCKS, SIPOREX BLOCKS AND FLY ASH BRICKS

VURA FixLoc is a pre-mixed cementitious powder adhesive composed of Portland cement, hydraulic binders, bonding agents, silica sand, and special adhesives. It is formulated as a crack-free, superior, flexible, high-bonding adhesive for AAC Blocks. It can also be used to fix concrete, cement blocks, Siporex blocks, and clay bricks to prevent clay absorption of water for the adhesive mix. It is a masonry mortar for use in laying bricks and blocks.

Characteristics

- Easy to mix and apply, just add water
- High bonding strength
- Flexible, shock and impact resistance
- Crack resistant
- No curing is required
- Can be applied in thin jointing with high adhesion
- Ideal for internal and external application
- Excellent strength and adhesion between panels
- Suitable for hot weather
- Suitable for concrete blocks, AAC blocks, Siporex blocks, Hollow blocks, Cement mortar blocks / bricks

Usage Guide

SUBSTRATE PREPARATION
The block side surfaces should be free of lose particles, dust, dirt, grease, oil. Spray the panel side surface with water before applying the mix. If expansion joints exist, do not cover with adhesive. Follow the specifications for the requirements for expansion joints.


APPLICATION
Apply a layer of VURA FixLoc mix to the horizontal and vertical side surface of the panel/black using a 6mm toothed trowel. Apply the adhesive to a one panel/block at a time. Position the AAC panel/block gently and use rubber mallet for tapping and a spirit level to check for alignment


Apply VURA FixLoc in thin layer (2 to 3mm) to enable the continuity of the thermos-insulation of the AAC blocks. Pay attention that the applied layer does not form a superficial film before fixing the block. If this occurs, apply a fresh new layer.
Leave a space of about 1-2 cm between the top of the block wall and the bottom of slab or beam in order to avoid formation of cracks along the wall. The cavity should be filled with compressible material.


Plastering could be applied to AAC walls after 24 hours of fixing the panels/blocks.

 

Vura Bau-Chemie LLP manufactures construction chemicals—adhesives, sealants, waterproofing solutions—using advanced German technology. With over 120 years of combined experience, they commit to sustainability by planting a tree for every product sold.

Address REGD. OFFICE:
13th Floor, Elite Business Hub, Sola, Ahmedabad 380060, Gujarat, India.
Call now +91 79 4849 2890