- Penetrates and seals new and existing marble, natural stones, terrazzo and concrete
- Improves chemical and water resistance
- Deepens clarity and heightens gloss
- Increase abrasion resistance
- Reduces alkalinity / efflorescence
- Easy to use and maintain
- Interior and exterior use
- User friendly, non-whitening
- Environmentally friendly, water based formula
- VOC compliant
For the treatment of polished absorbent marble and natural stone e.g. slate, marble, limestone, sandstone, granite, travertine etc.
SURFACE PREPARATION
- Clean the surface to remove any dirt, laitance, curing compound
- Surface should be sound, clean and free of waxes, dirt and coatings
- Apply only when temperatures will be above 2o C for atleast 4 hrs. following application
- Do not use citrus or acidic cleaners
APPLICATION
- VURA DenStone 800 may be applied immediately after 800 grit polish is over
- Spray VURA DenStone 800 evenly on the surface. Spread out any pools with a soft bristle broom or a flat microfiber pad
- Keep surface wet for atleast 20 minutes, adding more material where needed in order to maintain a uniformly wet surface
- After material has penetrated and is no longer wet on the surface, continue grinding and polishing to the intended final surface profile and desired finish