- Premium polyester base thixotropic transparent gel
- Fast setting and curing time
- Easily to apply and polish
- Good UV Stability
- Very good adhesion on natural stone
- Bigger defects, corners and edges can be filled due to slow hardening and low tensions - Resistant to water, petrol and mineral oils
- Grindable after hardening
- Colors can be mixed as per desired
For the treatment of ground and polished absorbent marble, natural stone, slate, limestone, sandstone, granite, travertine etc.
SURFACE PREPARATION
- The surface to be treated must be clean, completely dry and roughened. It should be free of moisture, dirt, oil and grease etc.
- Coloring is possible by adding Polyester pigment concentrates liquid upto 5% max
- Dilution is not possible
APPLICATION
Use gloves during application. Ensure proper and thorough mixing of resin (Part A) and hardener (Part B) before applying. Stir them energetically and use the product thus obtained. The mixture can be worked for approx. 15-20 minutes (23° C). Do not allow excess material to dry on surface. After approx. 6-8 hours the treated parts can be exposed to strain, after 12 hours approx. they can be further processed (grinding, milling, drilling). Do not mix any solvents. Add 1 to 2g of Hardener B (liquid) in 100g of PoliFill-G.
The hardening process is accelerated by heat and delayed by cold. Tools can be cleaned with thinner or mineral spirit.
Keep the tins closed after usage. Keep the gel and hardener away from the sunlight.